Coatings, Paints

Coatings, Paints

Coatings applied in liquid, gaseous or solid form protect and improve the surface properties of a vast range of substrates. Whether you are looking to simulate the application behavior of a household paint or you wish to analyze the formulation of complex nano-coatings – Anton Paar has unique measurement solutions in store for you. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product group
Device type
Showing to of

No results found!

With its extended low temperature range the automatic Abel closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method

Abel Flash Point Tester: ABA 4

Anton Paar Bioindenter: UNHT³ Bio

Automated flow chemisorption analyzer: ChemBET Pulsar

Ball mill: BM500

Coating thickness measurement: Calotest series

Combined density and sound velocity sensor: L-Com 5500

Compact digital refractometer: Abbemat

Compact Raman spectrometers: Cora 5001

Cryo & Humidity Chamber CHC plus+ is a unique combination of the multi-purpose CHC Cryo & Humidity Chamber and an advanced humidity (RH) generator for the analysis of humidity-dependent and/or temperature-dependent structural changes in materials using X-ray diffraction

Cryo & Humidity Chamber: CHC plus⁺

Density and sound velocity meter: DSA 5000 M

Density meter: DMA 4100 M

Density meter: DMA 4500 M

Density meter: DMA 5000 M

Density sensor: L-Dens 2300

Density sensor: L-Dens 3300

Abbemat Heavy Duty

Digital heavy duty refractometer: Abbemat

Abbemat Performance and Performance Plus

Digital performance refractometer: Abbemat

Domed Cooling Stage for Four-Circle Goniometers: DCS 500

Domed Hot Stage for Four-Circle Goniometers DHS 1100 with graphite dome for high-temperature X-ray studies of polycrystalline samples and thin films from 25 to 1100 °C

Domed Hot Stage for Four-Circle Goniometers: DHS 1100

Dynamic shear rheometer measuring head: DSR 502

Foam testing Pycnometer: PentaFoam

Fraass Breaking Point Tester BPA 5 with bitumen coated plaque.

Fraass Breaking Point Tester: BPA 5

Fully customizable laboratory automation solution: HTX

Gas Pycnometer: PentaPyc

Gas sorption analyzer: QUADRASORB evo

Handheld density meter: DMA 35 Basic

Heated sample changer: Xsample 610

Heated sample changer: Xsample 630

HPA-S represents the ultimate performance in wet chemical high pressure digestion sample preparation for AAS, ICP and Voltammetry. The HPA-S acid digestion method is an internationally recognized reference procedure and is in operation as a high-performance routine instrument in numerous laboratories.

High Pressure Digestion: HPA-S

Temperature Tribometer

High Temperature Tribometer: THT

HTR Compact: Rheometer autosampler for high sample throughput

HTR: Rheometer automation for high sample throughput and complex sample handling

Inline density meter: L‑Dens 7000 series

Inline viscometer: L-Vis

Low-Temperature Chamber: TTK 600

Mercury intrusion porosimeters: PoreMaster

Micro Combi Tester: MCT³

Micro Scratch Tester: MST³

Microindentation Tester: MHT³

Micropore physi-/chemisorption analyzers: autosorb iQ

The acid digestion rotor 16HF100 with 16 high pressure vessels is designed for high sample throughput and efficient handling.

Microwave digestion rotor: Rotor 16HF100

The acid digestion rotor 16MF100 with 16 pressure vessels is designed for high sample throughput and efficient handling.

Microwave digestion rotor: Rotor 16MF100

Microwave digestion rotor: Rotor 24HVT80

Microwave digestion system: Multiwave GO Plus

Rotor 16SOLV HF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave extraction rotor: Rotor 16SOLV HF100

Rotor 16SOLV MF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave extraction rotor: Rotor 16SOLV MF100

Rotor 1DRY is the ideal accessory for efficient handling of samples prior to digestion. Microwave-assisted drying takes a quarter of the time required by conventional methods, without carbonization or contamination of samples.

Microwave-assisted drying rotor: Rotor 1DRY

Modular Compact Rheometer: MCR 72/92

Modular Compact Rheometer: MCR 102/302/502

Motorized alignment for XRD: z-alignment stage

Nano scratch tester: NST³

Nanoindentation tester: NHT³

Remote Operating Terminal with wall mounting support for smart sensors

Operating Terminal / Remote Operating Terminal

Particle size analyzer: Litesizer 100

Particle size analyzer: Litesizer 500

Pin-on-disk tribometer: TRB³

Portable density meter: DMA 35

Revetest® Scratch Tester: RST³

Rolling-ball viscometer: Lovis 2000 M/ME

The RheolabQC is the quality control rheometer from Anton Paar. RheolabQC with temperature device C-PTD 180/AIR/QC and with Flexible Cup Holder.

Rotational Rheometer: RheolabQC

Rotational viscometer: ViscoQC

Perfect results with automatic cleaning and needle washing using up to three cleaning solvents.

Sample changer: Xsample 530

Single-station gas pycnometers for true density: Ultrapyc

Software for particle analysis: Kalliope™

Surface area analyzer: AutoFlow BET+

Surface area and pore size analyzers: NOVAtouch

Top View mounted T-probe with Rotor 8N of Multiwave PRO.

T-probe

With its extended low temperature range the automatic Tag closed cup tester can measure flash points or detect flammable vapors by the flash/no flash method.

Tag Flash Point Tester: TAG 4

Tensile Stage: TS 600 - sample stage for in-situ X-ray diffraction studies of stress/strain phenomena in fibers, foils and thin films

Tensile Stage: TS 600

Ultra nanoindentation tester: UNHT³

Vacuum and Flow Degasser: FloVac

Vacuum Degasser: XeriPrep

High Temperature Vacuum Tribometer

Vacuum Tribometer: VTHT / VTRB

Vapor sorption analyzer: VSTAR

Showing to of

Quantachrome Products

Anton Paar Applications

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

Concentration Measurement of Sodium Hydroxide Solutions by Refractive Index

The concentration of sodium hydroxide in water can be easily and quickly determined by refractive index measurement.

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Refractive Index Measurement of Ionic Liquids

Refractive Index Measurement of Ionic Liquids

Ionic liquids are special designer solvents as they are nonvolatile and liquid at ambient temperature, leading to a wide range of applications. Their refractive index helps to control the quality and also to characterize them.

Have a Good Trip

Have a Good Trip

Refractometers are widely used in the automotive industry, e.g. to control the quality of oils, chemical liquids and solids such as plastics and glasses.

Mesoporous thin films - Investigating the structure of multi-layered films by GISAXS

Mesoporous thin films - Investigating the structure of multi-layered films by GISAXS

Single- and double-layered mesoporous thin films have been analyzed by GISAXS for their structural properties using the SAXSpoint system.

Characterization of the scratch resistance of ceramic tiles

Characterization of the scratch resistance of ceramic tiles

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

High temperature tribological behavior of advanced hard coatings for cutting tools

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

The influence of Surface Roughness on Instrumented Indentation Testing (IIT)

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Nanoindentation approach to mechanical testing of extremely soft materials

Nanoindentation approach to mechanical testing of extremely soft materials

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Review of Indenter Materials for High Temperature Nanoindentation

Review of Indenter Materials for High Temperature Nanoindentation

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

Spherical Nanoindentation of Polyacrylamide Hydrogels using the Bioindenter (BHT)

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

The Ultra Nanoindentation Tester: New generation of thermal drift free indentation

Applications of nanoindentation in biology and medicine

Applications of nanoindentation in biology and medicine

Nanoindentation for biological materials

Identifying three different particle sizes in one sample with DLS

Identifying three different particle sizes in one sample with DLS

Particle suspensions often contain more than one size of particle. However, many particle analyzers cannot resolve particle mixtures, instead they detect an average of all sizes. The Litesizer™ 500 can detect three sizes in one sample.

Nanoparticles for Ceramics: Size, Stability & pH

Nanoparticles for Ceramics: Size, Stability & pH

In nanoparticle suspensions that will be used in ceramics, particle size and stability are of vital importance. Suspension stability is essential to ensure that the particles to stay in suspension, and maintain constant particle size.

Temperature-dependent GISAXS studies on thin films

Temperature-dependent GISAXS studies on thin films

The temperature-induced decomposition of a thin film structure has been studied using the SAXSpoint system with the new temperature-controlled GISAXS stage.

An insight into the Structure of Copolymer Surfactants

An insight into the Structure of Copolymer Surfactants

The structure of inhomogeneous (core-shell) nanoparticles was studied with the SAXSpoint system. The internal structure of Pluronic P123 micelles in water was determined by calculating the radial electron density profile.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

In-situ GISAXS heating experiments on self-assembled Gold nanoparticles

Thermal morphology changes of self-assembled Gold nanoparticles have been studied using the SAXSpoint system with the temperature controlled GISAXS stage.

Coatings, Paints - Rheology of Paints and Coatings with the RheolabQC

Coatings, Paints - Rheology of Paints and Coatings with the RheolabQC

Rheological measurements are essential for quality control and research in the paints and coatings industry. The Anton Paar Rotational Rheometer RheolabQC is perfectly suited for such applications.

Webinars

We offer you a great and constantly growing choice of live webinars and recordings on products, applications, and scientific topics.

View webinars