Ovo je obavezno polje.
Invalid
Broj dijela
Pogreška pri provjeri valjanosti!
Portable density meter:
DMA 35
Model:
- Za kontrolu kvalitete na terenu, npr. vina i vinskog mošta (°Brix, °KMW, Oechsle, Baumé)
- Za provjeru sladovine i prividnog ekstrakta u proizvodnji piva (°Plato)
- Za ostale neagresivne tekućine
- Jedan uređaj zamjenjuje sve staklene hidrometre na Vašem radnom mjestu
- Za mjerenje zapaljivih kemikalija u opasnim okruženjima
- Samosigurno (Ex oznaka [Ex] II 2 G Ex ib IIB T4)
- Zabrtvljeno kućište otporno na teške uvjete, prikladno za industrijske i terenske primjene
- Za mjerenje uzoraka naftnih derivata u opasnim okruženjima
- Samosigurno (Ex oznaka [Ex] II 2 G Ex ib IIB T4)
- Potpuno kompatibilan sa standardima IP 559 i ASTM D7777.
- Za mjerenje specifične težine sumporne kiseline u olovno-kiselinskim akumulatorima tijekom proizvodnje i u svrhe održavanja.
- Stupanj zaštite IP54
- Visoka kemijska otpornost za uporabu u teškim uvjetima
Samo internetska cijena
| isklj.uklj. 0PDV
Cijena
na zahtjev
na zahtjev
Informacije o kupnji
Kupi Anton Paar instrumente putem interneta
Broj dijela:
Provjerite dostupnost u internetskoj trgovini
Zatražite ponudu
Kupite ovaj proizvod putem interneta
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Take DMA 35 with you at all times and measure the density and concentration of your sample directly on-site. One portable density meter replaces all the glass hydrometers in your workplace and gives you the accuracy expected from a lab instrument. DMA 35 uses only two milliliters of sample and saves you a lot of time as there is no need to transport the sample to the lab. It is built to withstand the knocks and spills of outdoor use. An RFID interface for quick sample identification and a Bluetooth® interface for convenient data handling in the field are integral parts of the instrument.
All products are delivered with factory calibration.
Digital density measurement redefined
Learn moreGlavne značajke
A portable density meter providing accurate results, also under harsh conditions
The splash-proof DMA 35 is made for density and concentration measurement in harsh environments, including outdoor operation, while providing the accuracy expected from a lab instrument. The smart oscillator placement makes sure that gas bubbles move to where they can’t affect your result: outside the measuring cell.
Designed for on-site density measurements
- Leak-proof sealed housing to withstand rough conditions in industrial and field applications
- Additional rubber protection keeps the measuring cell safe
- Strong hard-glass front for a long working life
- Operated via capacitive keys with a sensitivity suitable for use with or without gloves
- Suitable for both left- and right-handed users
- Read RFID tags and start or abort measurements via gesture control: One hand is free to hold you steady when measuring hard-to-reach samples.
- For sample temperatures of up to 100 °C, supporting quick decisions, e.g. in the beer brewing process (measurement on hot wort)
- Smart patented oscillator connection (AT516421 B1) enables replacement in case of cell rupture
Intrinsically safe – for use in hazardous locations
- Intrinsically safe models DMA 35 Ex and DMA 35 Ex Petrol (Ex marking [Ex] II 2 G Ex ib IIB T4) for use in hazardous areas
- The only option available on the market for safe measurements in explosive atmospheres
- DMA 35 Ex is particularly suitable for measuring flammable chemicals.
- DMA 35 Ex Petrol provides excellent resistance to petroleum samples and fully complies with the ASTM D7777 and IP 559 standards.
Fastest filling and measurement – for a huge variety of samples
- Fill all kinds of samples – no matter what the viscosity is – in one second using the built-in manual pump or a syringe.
- No expensive electrical wearing parts: You can easily do all cleaning and maintenance work yourself.
- Measuring cell with inspection window and backlight for convenient inspection of proper sample filling
- The most reliable portable density meter for fermenting beer or wine, due to intelligent oscillator placement (potential bubbles automatically move outside the measuring cell)
- Lock-position of pump preventing sample carryover
- Auto-rotating display for perfect visibility of results at any instrument position
- Influence of viscosity on your density result is automatically corrected: for reliable measurements, also on highly viscous samples
Perfect traceability of density and concentration results
- Storage of up to 250 sample IDs for easy sample identification
- RFID interface for changing measurement settings quickly by reading RFID tags
- Storage of up to 1024 measurement results including time stamp and sample ID
- Wireless data exchange with a PC (csv or txt format) and data export to a printer via Bluetooth® for convenient data handling in the field – no extra software required
Leave your glass hydrometer or pycnometer for a digital density meter
- Measurement directly at the sample container
- Requires only 2 mL of sample, filled via the built-in pump
- Preinstalled and programmable concentration units – no further calculations necessary
- Results available in seconds
- Perfect traceability of results
Calculate your individual savings now:
Quickly determining the state of charge of lead-acid batteries
- Determination of the specific gravity of sulfuric acid
- Used for measurement of sulfuric acid in lead-acid battery production and maintenance of uninterruptible power supply (UPS) systems
- Protection class IP54 and high chemical resistance
Tehničke specifikacije
| Patents granted | Smart connection of measuring cell: Patent AT516421 (B1), EP3015847 (B1) |
| Other special functions | Viscosity correction for reliable measurements, also on highly viscous samples Gesture control for easy one-handed measurements Identification of results outside your specified limits |
| Measuring range | Density: 0 g/cm³ to 3 g/cm³ Temperature: 0 °C to 40 °C (32 °F to 104 °F)* |
| Accuracy | Density: 0.001 g/cm³ ** Temperature: 0.2 °C (0.4 °F) |
| Repeatability, s.d.*** | Density: 0.0005 g/cm³ ** Temperature: 0.1 °C (0.2 °F) |
| Reproducibility, s.d.*** | Density: 0.0007 g/cm³ |
| Digital Resolution | Density: 0.0001 g/cm³ Temperature: 0.1 °C (0.1 °F) |
| Ambient temperature**** | Standard Version, Ampere Version: -10 °C to +50 °C (14 °F to 122 °F) Ex and Ex Petrol version: -10 °C to +40 °C (14 °F to 104 °F) |
| Supported measuring units |
|
| Sample volume | 2 mL |
| Dimensions (L x W x H) | 245 mm x 103 mm x 126 mm |
| Data memory | 1024 measured results, 30 measuring methods, 250 sample IDs |
| Power supply | Three 1.5 V LR06 AA alkaline batteries |
| Weight | 660 g |
| Interfaces | Bluetooth®, RFID (both included by default) |
| Protection class | IP54 (first digit: 5 – protection against dust ingress; second digit: 4 – protection against splash water from any direction) |
| Intrinsic safety of Ex and Ex Petrol version | ATEX: II 2G Ex ib IIB T4 Gb IECEx: Ex ib IIB T4 Gb |
| Scope of supply | Portable density meter, filling tube, adapter for syringe filling, syringes, transportation case, rubber protection for measuring cell, three batteries, Allen key, instructions |
| Menu language | English, German, Chinese, Japanese, French, Russian, Italian, Portuguese, Turkish, Spanish |
| Available options | Elongated filling tube |
| * Measurements up to 100 °C possible ** Viscosity <300 mPa•s, density <2 g/cm³ *** according to ISO 5725 **** Sample must not freeze within the measuring cell; Ex and Ex Petrol version: -10 °C to +40 °C (14 °F to 104 °F) |
DMA is a registered trademark of Anton Paar (EM 013414867)
Standardi
Otvori sve
Zatvori sve
ASTM
D7777
Energetski institut
IP 559
ISO
15212-1
Certificirana usluga servisa Anton Paar
Kvaliteta usluge Anton Paar u usluzi i podršci:
- Više od 350 tehničkih stručnjaka s certifikatom proizvođača širom svijeta
- Kvalificirana podrška na vašem lokalnom jeziku
- Zaštita za vaše ulaganje tijekom njegovog životnog ciklusa
- Trogodišnje jamstvo
Dokumenti
-
Food | Dairy Products | The Hand in Hand Solution for Milk and Dairy Products Izvješća o primjeni en
-
General | From measuring result to concentration - the creation of a custom function Izvješća o primjeni de, en
-
Quality Control of Sodium Hypochlorite (NaOCl) Solutions by Density Measurement Izvješća o primjeni en
-
Weight to volume conversion of cosmetic products by means of density measurement Izvješća o primjeni en
Slični proizvodi
Consumables & Accessories
Consumables & Accessories
Not all items are purchasable online in specific countries.
To find out if you can purchase online from your location, check the online availability below.
Not all items are available for purchase online.
If you do not find the item you require, please contact your Anton Paar sales representative.
Samo internetska cijena
| isklj.uklj. 0PDV
ABS Disc Tag 30mm w. 5mm hole R
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 92412
ALKALINE BATTERY 1.5 V LR6 AA VARTA
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 191889
ALLEN KEY 3 MM DIN 911
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 58264
Black Laundry Tag 30mm R
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 92413
Bumper Sensor ATMO
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 165214
DENSITY STANDARD "OCEAN SEAWATER"
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 159213
Density Standard Coastal Seawater
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 156636
Draft tube 180x4x2 PTFE 1x1/4"-28 UNF
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 172214
Female Luer to 1/4-28 Male Adapter
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 64792
FILLING TUBE 600 mm for DMA™ 35 V4
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 178843
FOAM RING
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 77869
Luerconnector ATMO 1/4-28UNF DI=2,5mm
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 172211
Nipple PVDF ATMO
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 172246
O-Ring 15x1.6 VITON
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 66789
O-Ring 4x2 Extrem Viton 75 +/-5 VB75ETP0
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 180402
Printer USB/RS232/Bluetooth CMP-20i
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 97154
RUBBER HOUSING DMA 35 OPERATING PANEL
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 177115
SPRING FOR PISTON HASTELLOY C22
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 74425
Stir Bar PTFE D=3 L=10 CYL
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 89088
SYRINGES 2 ml LUER (10 PCS)
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 58802
UNION NUT INCL. EYE PLATE
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 177230
BATTERY COVER FOR DMA™ 35
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 88186
Batterycase PP DMA™35 V4
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 171506
Bluetooth-USB Adapter 3.0
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 99180
CARRYING CASE FOR DMA 35 Version 4
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 177345
CARRYING STRAP DMA™ 35 Version 4
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 177301
HAND PUMP LL DMA™ 35/SNAP PTFE Piston
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 195149
Press Button ATMO PP
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 165216
Press Button ex. lock function ATMO PP
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 170085
PRINTER PAPER 57MM LONG LIFE
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 166605
PRINTER PAPER FOR PRINTER CMP-10
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 88373
RFID ABS DISC TAG 30 x 5 x 2 mm
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 88443
RFID Laundry Tag 30mm
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 88444
RFID PVC Disc Tag 30mm
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 88445
RUBBER HOUSING MEASURING CELL EX
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 194159
SENSOR REPAIR KIT DMA 35 V4
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 197354
SPARE WRISTBAND FOR PORTABLE INSTRUMENTS
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 92477
White PVC Sticker Disc Tag 30mm R
Vrijeme isporuke:
%1$s - %2$s radni dani
%1$s – %2$s tjedna
%1$s – %2$s mjeseci
Broj dijela: 92414