Application Report PMA 5: Comparison Between Standard Cup and Mini-Cup
Using the sample quantity stated in the standard for determining a flash point is not always possible. Sometimes a material is very expensive or only a small volume is available. As a solution Anton Paar offers the mini-cup for the PMA 5 flash point tester.
This Application Report describes the flash point determination with two different sample amounts: 75 mL standard test cup and 15 mL mini-cup. Flash point tests with 18 different samples were performed using the PMA 5 flash point tester to investigate whether the results achieved with the two cup sizes show a comparison which meets the reproducibility of the test method ASTM D93-A. The reproducibility would make it possible to use the mini-cup saving expensive sample material or to perform tests when only a small sample amount is available.
The PMA 5 is an automatic closed-cup flash point tester for testing the flammability of a liquid. The flash point is the lowest temperature at which the vapors of a sample ignite upon the application of an ignition source. The two ignition systems of the PMA 5 give the user the flexibility to work with an electric or gas igniter: If the gas ignition is used, the electric igniter will automatically relight the gas flame during the test – making it a reliable and secure instrument. The PMA 5 is applicable for biodiesel and biodiesel-blended fuels along with distillate fuels like diesel, heating oil and kerosene. It is also commonly used for other potentially flammable liquids.
Get the document
To receive this document please enter your email below.