Application Report PMA 5: ASTM D93 - ASTM Proficiency Testing Program for Flash Point of Diesel Fuel

Anton Paar participated in the ASTM Proficiency Testing Program to test the diesel fuel sample DF21710 with the PMA 5 and achieved a top result.

1 Introduction

This Application Report describes the flash point determination of diesel fuel performed with the automatic closed cup flash point tester PMA 5 for the ASTM Proficiency Testing Program. You will get information about all accessories you need and how you have to set up your PMA 5 to obtain excellent results.

Quality and reliability of test results are essential for laboratories. The ASTM Proficiency Testing Program (PTP) is a valuable tool for laboratories and instrument manufacturers worldwide to conduct equal tests on the same material in accordance with the same test method. ASTM will evaluate the performance of the laboratories by arranging a statistical analysis of the results.

Participating in interlaboratory studies (ILS) organized by the German standardization body DIN or the European Standardization Committee EN for more than 20 years, ILS have a long history with Anton Paar.

Get the document

To receive this document please enter your email below.

Loading...

Error