Recommended Results

Lubricants

The goal of lubrication is minimum friction and wear. Oils, greases or dry lubricants are used  for this purpose. To characterize these lubricants and reliably control their quality, Anton Paar offers innovative approaches for precisely measuring density, viscosity, demulsibility, corrosion prevention, foam testing, friction and wear testing and other important quality parameters of lubricants. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product Group
Device type
Showing to of

No results found!

Abbemat Heavy Duty

Abbemat Heavy Duty Line

Abbemat WR/MW, Multi wavelengt refractometer

Abbemat MW Multiwavelengths Refractometer

Abbemat Performance and Performance Plus

Abbemat Performance and Performance Plus Line

High-temperature chamber HTK 1200N for combined reflection and transmission XRD studies at high temperatures up to 1200 °C

Capillary Extension: HTK 1200N

The automatic Cleveland open cup tester features a fire extinguishing device, automatic relighting and a skin removal device for bitumen.

Cleveland Flash & Fire Point Tester: CLA 5

DMA™ 35 Basic Portable Density Meter

DMA™ 4100 M density meter

DMA™ 4500 M density meter

DMA™ 5000 M density meter

Density and Sound Velocity Meter: DSA 5000 M

External Measuring Cell: DMA™ HPM

Foam Tester Twin-Bath (air pump optional)

Foaming Characteristics: Foam Tester

Two-place grease working machine with stroke counter.

Grease Working Machine: GWM 5

DH 5 Herschel emulsifier with accessories for 8 test places

Herschel Emulsifier: DH 5

HPA-S represents the ultimate performance in wet chemical high pressure digestion sample preparation for AAS, ICP and Voltammetry. The HPA-S acid digestion method is an internationally recognized reference procedure and is in operation as a high-performance routine instrument in numerous laboratories.

High Pressure Digestion: HPA-S High Pressure Asher

High Throughput Viscometer HTV

High Troughput Rheometer

High-Throughput Rheometer: HTR

High-precision thermometers: MKT 50 and MKT 10

Inline Viscometers L-Vis 510 and 520 Ex

Inline Viscometer for Hazardous Areas: L-Vis 520 Ex

Inline Viscometer: L-Vis 510

MCR Tribometers

Micro Scratch Tester (MST³)

Rotor 16SOLV HF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave Digestion and Extraction: Rotor 16SOLV HF100

Rotor 16SOLV MF100 expands the possibilities of Multiwave PRO for the microwave-assisted digestion and extraction of inorganic and organic samples and is easily upgraded for acid digestion applications by interchanging screw caps.

Microwave Digestion and Extraction: Rotor 16SOLV MF100

The acid digestion rotor 16HF100 with 16 high pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion: Rotor 16HF100

The acid digestion rotor 16MF100 with 16 pressure vessels is designed for high sample throughput and efficient handling.

Microwave Digestion: Rotor 16MF100

Rotor 8EVAP is an innovative accessory for microwave evaporation with the modular Multiwave PRO microwave sample preparation system. It greatly simplifies and accelerates the microwave-assisted evaporation of acids and concentration of aqueous sample solutions in 8 vessels simultaneously.

Microwave Evaporation: Rotor 8EVAP

The Multiwave PRO microwave reaction system serves two groups: professionals in trace analysis and synthetic chemistry.

Microwave Reaction System: Multiwave PRO

Monowave 450: Automated Microwave-assisted Extraction

Nano Tribometer (NTR³)

Oxidation Stability Tester: RapidOxy 100

Penetrometer PNR 12 with accessories for cone penetration and needle penetration.

Penetrometer: PNR 12

The automatic Pensky-Martens closed cup tester PMA 4 SC features a 12-place sample changer, a fire extinguishing device, a patented   connection system, gas and electric ignition.

Pensky-Martens Flash Point Tester with Sample Changer: PMA 4 SC

The automatic Pensky-Martens closed cup tester features a fire extinguishing device, a patented connection system, gas and electric ignition.

Pensky-Martens Flash Point Tester: PMA 5

Pin-on-Disk Tribomter

Pin-on-Disk Tribometer (TRB)

The pressure sensor accessory allows for precise reaction control within the reference vessel of Rotor 16MF100 or Rotor 16HF100. The pressure data is transferred to the oven via infrared signal. If required, the pressure sensor accessory can be upgraded to a pressure/temperature sensor accessory.

Pressure Sensor Accessory

Rheometer Measuring Head

MCR Rheometer Series: Oscillatory and rotational rheometers from Anton Paar for QC, product development and R&D.

Rheometer: MCR 102, 302, 502

SVM™ Series

Top View mounted T-probe with Rotor 8N of Multiwave PRO.

T-probe

Ultra Nanoindentation Tester (UNHT³)

High Temperature Vacuum Tribometer

Vacuum Tribometer (VTHT / VTRB)

Xsample™ 340

Perfect results with automatic cleaning and needle washing using up to three cleaning solvents.

Xsample™ 530

Xsample™ 630

Pressure/temperature sensor accessory for precise reaction control within the reference vessel of Rotor 16MF100 and/or Rotor 16HF100.

p/T Sensor Accessory

M50 pressure/temperature sensor accessory for precise reaction control within the reference vessel of your Rotor 48MF50.

p/T Sensor Accessory: M50

Showing to of

Anton Paar Products Applications

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

In-Situ observation of the scratch/indentation true contact area to provide analysis without being model-dependent

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Nanotribological properties of Diamond like carbon thin flexible films on ACM rubber

Application RapidOxy: Stability of Lubricating Greases

Application RapidOxy: Stability of Lubricating Greases

The stability of lubricating greases with different thickener types was tested at 160 °C in the RapidOxy and according to the ASTM D942.

Determining the right time for an oil change with SVM™ 3001

Determining the right time for an oil change with SVM™ 3001

SVM™ 3001 gives you more parameters than any other kinematic viscometer on the market. A single measuring cycle on a small sample volume yields kinematic viscosity, density, dynamic viscosity, viscosity index and more.

Viscosity of Lubricating Oil with SVM™ 3001

Viscosity of Lubricating Oil with SVM™ 3001

SVM™ 3001 gives you more parameters than any other kinematic viscometer on the market. A single measuring cycle on a small sample volume yields kinematic viscosity, density, dynamic viscosity, viscosity index and more.

SAXSpoint with MetalJet Source

SAXSpoint with MetalJet Source

SAXSpoint now integrates the high-brightness MetalJet X-ray source enabling ultra-fast SAXS measurements in the laboratory.

Fastest Viscosity Index Determination from the Lowest Sample Volume with SVM™ 4001

Fastest Viscosity Index Determination from the Lowest Sample Volume with SVM™ 4001

SVM™ 4001 determines kinematic viscosity and density at two different measuring temperatures simultaneously with one filling in one measuring cycle. This innovative double cell technology allows for up to 24 viscosity index measurements per hour.

Calculation of the Carbon Type Distribution of Oils with SVM™ 4001 and Abbemat

Calculation of the Carbon Type Distribution of Oils with SVM™ 4001 and Abbemat

SVM™ 4001 determines kinematic viscosity and density at two different measuring temperatures simultaneously in one go. Combined with an Abbemat refractometer, fast and automated carbon distribution analysis of oils is performed according to ASTM D3238.

Determination of Static Friction

Determination of Static Friction

MCR tribometers from Anton Paar enable precise and reproducible measurements of tribological characteristics such as limiting friction and break-away forces.

Extend your Rheometer to Tribology

Extend your Rheometer to Tribology

Employ the precise motion and force control of MCR rheometers for your tribological measurements. Use a range of accessories designed to work at their best in the MCR series.

Four ball MCR Tribometer

Four ball MCR Tribometer

MCR Tribometer platform from Anton Paar offers a new setup for tribological measurements with the well-known four ball geometry.

Optimization of Lubrication Additives with Anton Paar Tribometers

Optimization of Lubrication Additives with Anton Paar Tribometers

The MCR tribometer from Anton Paar enables measurements of tribological properties in 9 decades of motion control.

Tribological Measurements with a Flexible Setup

Tribological Measurements with a Flexible Setup

The MCR tribometer platform from Anton Paar offers a wide range of disposable measurement setups to meet the conditions of your tribological issue.

Update to the All-new RheoCompass™ Software for MCR Tribometers

Update to the All-new RheoCompass™ Software for MCR Tribometers

Update your software package to RheoCompass™ and make your tribological measurements easier and more convenient.

Correlating Viscosity and Particle Size Parameters determined by Small Angle X-Ray Scattering Studies of concentrated MAb Solutions

Correlating Viscosity and Particle Size Parameters determined by Small Angle X-Ray Scattering Studies of concentrated MAb Solutions

Monoclonal antibodies (MAb) solutions are a major class of biopharmaceuticals with various applications. However, challenges like a high viscosity at the required MAb concentrations need to be addressed at an early development stage.

Viscosity of Automotive Brake Fluids

Viscosity of Automotive Brake Fluids

The viscosity of brake fluids is a critical parameter for passenger safety. The SVM™ 3001 offers unbeatable fast and reliable viscosity testing at all required temperatures and features automatic calculation of the Viscosity Index.

Viscosity of Metalworking Fluids in Cutting Processes

Viscosity of Metalworking Fluids in Cutting Processes

The metalworking fluid is a vital part of the manufacturing process. Viscosity influences the liquid’s performance and the manufacturing quality. SVM™ 3001 is a fast and precise solution to measure the quality-relevant parameters viscosity and density.

Application DH 5: Water Separability acc. ASTM and ISO

Application DH 5: Water Separability acc. ASTM and ISO

This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water. It is used for specification of new oils and monitoring of in-service oils.

Application RapidOxy: Stability of Neat Cutting Oils

Application RapidOxy: Stability of Neat Cutting Oils

Neat cutting oils are used in machining operations, e.g. grinding, turning, milling, broaching, drilling, tapping, gear cutting etc., to provide cooling and lubrication of the tools and a good surface finish of the components being machined.

Application_Flash_lubricants_and_oils.pdf

Application_Flash_lubricants_and_oils.pdf

Bearing Characterization with Full Motion Flexibility and High Precision

Bearing Characterization with Full Motion Flexibility and High Precision

MCR tribometers from Anton Paar allow for fast ball bearing characterization with superior motion, temperature and humidity control.

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Lubricants

Lubricants

Inline measurement of the viscosity of lubricants at a lubricant manufacturing plant L-Vis 510 will continuously be in place in your production line obtaining viscosity and temperature values

Precision Motion Control for Tribological Measurements

Precision Motion Control for Tribological Measurements

Plan and execute measurement profiles with the utmost precision at rotational speeds ranging between 10e-6 and 3000 rpm. Characterize tribological systems with nanoscale accuracy in displacement.

Sensor Integration - Next level Plug and Play

Sensor Integration - Next level Plug and Play

Static Friction - Influence of Humidity

Static Friction - Influence of Humidity

Closely observe the effect of humidity on the static friction of materials with measurements on an Anton Paar MCR tribometer. Characterize the limiting friction and break-away forces of tribological systems with high precision and reproducibility.

Tribological Measurements with a Flexible Geometry

Tribological Measurements with a Flexible Geometry

MCR tribometers from Anton Paar offer a wide range of disposable sample holders for an extended range of measurement setups.

Tribological Properties of Polymers

Tribological Properties of Polymers

MCR tribometers from Anton Paar allow outstanding characterization of tribological properties of polymers.