Recommended Results

Liquid Fuels

Liquid Fuels

The wide range of liquid fuels such as automotive gasoline, jet fuel, kerosene, diesel, ethanol and many more need to be measured for their properties due to governmental & environmental regulations. Anton Paar offers a variety of solutions for measuring the density, viscosity, distillation behavior, flash and fire points, corrosiveness, vapor pressure, oxidation stability, gum testing, digesting fuel samples for subsequent trace analysis and many more parameters of countless fuels under diverse environmental conditions. Find the measuring instrument that meets your particular needs in the instrument list below – or let us help you find the best solution by contacting us directly.

Get in touch

Anton Paar Products

Your choice: Reset all filters X
Type of operation
Standards
Product Group
Device type
Showing to of

Anton Paar Products Applications

AdBlue®/DEF: Refractometric Analysis

AdBlue®/DEF: Refractometric Analysis

AdBlue®, also known as DEF, is an aqueous urea solution. It lowers nitrogen oxides in diesel emissions. International standards demand that refractive index be measured for the determination of the urea concentration in AdBlue®.

Measurement of Ether-Type Fuel Icing Inhibitors in Aviation Fuels

Measurement of Ether-Type Fuel Icing Inhibitors in Aviation Fuels

Fuel system icing inhibitors are added to jet fuel to prevent freezing of the water content at flight altitude. Their concentration in water and therefore the freezing point correlates with the refractive index.

Application PetroOxy: Save on Expensive Antioxidant Additives for Spark-Ignition Fuels

Application PetroOxy: Save on Expensive Antioxidant Additives for Spark-Ignition Fuels

Additives improve the stability and performance of fuel. The correlation of oxidation stability to antioxidant concentration can be determined with the PetroOxy to prevent the excessive use of valuable antioxidant materials and operate cost effective.

Application ADU 5: Distillation of Reference Fluids

Application ADU 5: Distillation of Reference Fluids

Running a distillation with reference fluids is necessary to check the calibration status of the temperature measurement system in an automatic distillation unit.

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Improve Digestion Quality and Save Money – Microwave Digestion rules out Open Digestion

Reliable elemental analysis results need robust sample preparation to destroy sample matrices or to separate matrix from analytes. The sample preparation step is by far the most error-prone and critical step of the analytical procedure.

Sensor Integration - Next level Plug and Play

Sensor Integration - Next level Plug and Play

Application PetroOxy: Temperature Dependency of Test Results According to Arrhenius

Application PetroOxy: Temperature Dependency of Test Results According to Arrhenius

The temperature dependency of test results for diesel was investigated. Arrhenius equation was checked.

Application PetroOxy: Influence of Ignition Improvers (EHN)

Application PetroOxy: Influence of Ignition Improvers (EHN)

Ignition improvers increase the Cetane number of distillate fuels by improving fuel ignition characteristics in the combustion chamber during the compression stroke.

Application PMA 5: Secondary Working Standard 4-Hydroxy-4-methyl-2-pentanone (Diacetonalcohol)

Application PMA 5: Secondary Working Standard 4-Hydroxy-4-methyl-2-pentanone (Diacetonalcohol)

Flash point values are a function of the apparatus design, the condition of the apparatus used and the operational procedure carried out.

Application ADU 5: Ethanol Containing Gasoline

Application ADU 5: Ethanol Containing Gasoline

E50 is an important temperature point in gasoline specification. Gasoline oxygenate blends with higher ethanol content show an azeotropic effect which has significant influence on the temperature slope and have special requirements for heater control.

Testing the quality of jet fuel with SVM™ 3001

Testing the quality of jet fuel with SVM™ 3001

When it comes to passengers' safety, rely on SVM™ 3001. SVM™ 3001 gives you more parameters than any other kinematic viscometer on the market. A single measuring cycle on a small sample volume yields kinematic viscosity, density, dynamic viscosity and more

Certify diesel fuels for both kinematic viscosity and density according to ASTM D975

Certify diesel fuels for both kinematic viscosity and density according to ASTM D975

SVM™ 3001 gives you more parameters than any other kinematic viscometer on the market. A single measuring cycle on a small sample volume yields kinematic viscosity, density, dynamic viscosity and more.

Application PMA 5: Quick Verification

Application PMA 5: Quick Verification

Flash point values are influenced by the type of apparatus, its condition, the test method or how a test is carried out. Adding water to a solvent can raise the flash point value and therefore can be used for a quick check of the instrument performance.

Application ABA 4: Quick Verification

Application ABA 4: Quick Verification

Flash point values are influenced by the type of apparatus, its condition, the test method or how a test is carried out. Adding water to a solvent can raise the flash point value and therefore can be used for a quick check of the instrument performance.

Application Callisto 100: Three Devices Share One Cooling Unit

Application Callisto 100: Three Devices Share One Cooling Unit

Using a special multi-way connector, three Callisto 100 instruments can be connected to a single Julabo FP51-SL cooling unit. This minimizes costs and saves laboratory space.

Application Callisto 100: Small Cooling Unit for Single Device

Application Callisto 100: Small Cooling Unit for Single Device

With the Julabo CF41 a small refrigerated circulator model is now available to be used with a single Callisto 100. This minimizes costs and saves laboratory space.