e-SPRESSO WEBINAR: Black to the Future- Carbon Capture and Storage

e-SPRESSO WEBINAR: Black to the Future- Carbon Capture and Storage

Coal and oil are nature’s carbon reservoirs that have been tapped over centuries and burned for energy; from black to gas… carbon dioxide that is. Now there’s keen interest in capturing and storing that gas, carbon dioxide, (i) to prevent adding more of it to the atmosphere (ii) keeping it on tap as raw feedstock for various industrial processes. This webinar will look at characterizing functionally useful solids for capture and storage processes based on sorption.

Key insights:

  • Surface area, pore size, and pore volume measurements by low-pressure gas sorption
  • Different adsorbents and calculations for determining micropore size
  • High-pressure CO2 sorption capacity measurements
  • Surface excess versus adsorbed amount

In this webinar, you will learn how gas adsorption is used to determine the geometrical properties of microporous adsorbents that are currently used for, or have potential for, carbon capture and storage,
and how to accurately determine CO2 storage capacity as a function of elevated pressure under various temperature conditions.

Suitable for scientists and engineers working in research, development and quality assurance.

Dr. Martin Thomas (English)
Martin Thomas

Dr Martin A. Thomas has more than forty years of industrial experience in the characterization of powders and porous materials. After studying for his Master’s degree in analytical chemistry and then his Doctorate in inorganic/physical chemistry - both at the School of Chemistry, University of Birmingham (UK) - he joined Cookson Group's Central Research labs where he began his specialization in powders and porous materials. He joined ICI's Catalyst Research Centre (now a Johnson-Matthey facility) in 1985 and spent six years as a Principal Research Officer in charge of porous materials characterization.

In 1991 Dr. Thomas joined Quantachrome Instruments which became part of Anton Paar in 2018. He is currently serving as Lead Scientist for the Surface and Pores product line at Anton Paar.

Dr. Martin Thomas has authored several research articles and books and has also been co-author of ten patents relating to porous materials and their characterization.

back

Get free access now!

Simply fill out the form below to receive free access to tools and restricted content.

Loading...

Error