|
|
|
The RheolabQC is based on the newest and most innovative technologies. It provides unrivaled performance for quality control combined with very easy operation and robust design.
|
| |
Operation: Two options
|
|
Manual operation - The RheolabQC can be operated manually either via the robust keypad or via an external keyboard. The internal memory has storage capacity for over 100 predefined measuring profiles and over 50,000 measuring points in more than 100 measurement series. The data can be read out by a software program immediately, stored for later readout or sent to a connected printer.
|
| |
|
|
|
Software - The reliable RheoPlus software from Anton Paar is available for operating the instrument from a computer. The RheolabQC can be connected via the conventional RS232 interface or via a Lan-Ethernet interface directly to the company or laboratory network. There are numerous analysis models and automation routines available, including a special quality control module. Connection to well-known LIM systems and conformity with 21 CFR Part 11 are standard.
|
| |
Measuring geometries
|
|
The following measuring geometries are available:
- Concentric cylinder measuring systems according to ISO 3219 and
- DIN 53019
- Double gap measuring systems according to DIN 54453
- Disposable measuring systems
- Vane geometries and spindles
A quick coupling allows the measuring system to be inserted into the system with a simple hand movement.
|
| |
Temperature control devices
|
|
Two liquid-heated/liquid-cooled temperature control systems, each equipped with a PT100 for temperature measurement, enable quick and accurate temperature control. They have a range from -20 to 80 °C and -20 to 180 °C.
|
| |
Measuring cup holder
|
|
An easy to adapt, flexible cup holder enables quick exchange of individual sample containers in diverse shapes and sizes.
|
| |
Applications
|
|
The RheolabQC can be used for a wide variety of applications. The measuring results can be used to assess the quality of raw materials as part of the incoming inspection or for the design of pumps in plant manufacturing. It can also be used during product manufacturing or processing to check the individual steps such as mixing, dispersing, etc.
The wide measuring range, highly dynamic EC motor and the wide spectrum of test profiles are useful for numerous applications.
|
| |
|
|
|
| Applications |
Tests |
| Coatings |
Flow curve, yield point, 3-interval test
(structural decomposition and regeneration) |
| Building materials |
Yield point, 3-interval test (structural
decomposition and regeneration) |
| Slurry |
Flow curve, yield point, 3-interval test
(structural decomposition and regeneration) |
| Adhesives |
Flow curve, 3-interval test (structural
decomposition and regeneration) |
| Food |
Flow curve, temperature test, 3-interval
test (structural decomposition and regeneration) |
| Cosmetics |
Flow curve, yield point, temperature swing
test |
| Soft gels |
Yield point, shearing, 3-interval test (structural
decomposition and regeneration) |
| Lubricants, oils |
Flow curve, temperature test |
| Asphalt |
Flow curve, temperature test |
|
| |
)
)
